Industrial Machinery

KraussMaffei Extrusion Launches Single-Stage PVC InlineMixing for Roofing Membranes

The company has replaced batchwise dryblend preparation with direct gravimetric dosing into a twin-screw extruder, claiming up to 75 percent lower energy costs.

Dario MontelliNovember 17, 20265 min read0 views
Concept illustration of a continuous extrusion line in which gravimetric feeders supply an extruder and calender rolls press PVC into a running membrane sheet.

KraussMaffei Extrusion has developed a single-stage extrusion process for PVC roofing membranes that removes the separate dryblend preparation step normally carried out before extrusion. The company, headquartered in Laatzen, Germany, announced the process, named PVC InlineMixing, on 17 November 2026 as a continuous alternative to the conventional two-stage route.

In the established two-stage sequence, PVC powder, plasticizers, additives and fillers are first compounded batchwise in a separate hot-cold mixer combination to produce a dryblend. That blend is cooled, stored intermediately and only then plasticized in a twin-screw extruder and formed into membrane. PVC InlineMixing eliminates the separate mixing stage: all solid and liquid components are dosed directly into the extruder by gravimetric feeding systems, in exactly the proportions the formulation requires.

Energy, space and staffing effects

According to KraussMaffei, the continuous route reduces energy consumption and therefore energy costs by up to 75 percent, depending on the formulation, the system parameters and the plant location. Two factors drive that figure: there is no need to invest in a separate heating-cooling-mixing combination, and the material has to be heated only once instead of being warmed, cooled and later reheated for plasticizing.

Dropping the separate mixer also shrinks the footprint of the whole system and cuts the labor required to run it. Maintenance costs fall as well, because wear parts for the heating-cooling mixer are no longer needed. The company frames the result as lower capital expenditure (CAPEX) combined with lower operating costs (OPEX), which it says improves overall cost-effectiveness and creates the conditions for a quick return on investment.

Formulation changes during operation

The single-stage concept also changes how recipes are handled. Formula adjustments and color changes can be implemented directly during operation through the integrated control system, so time-consuming preparation and intermediate storage of separate dryblend batches drop out of the sequence. Compared with a system that relies on dry-blend premixing, the company describes the continuous process as offering high flexibility and significantly lower staffing requirements.

Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion, said the approach gives membrane manufacturers lower production costs, greater flexibility and more efficient manufacturing, and that producers can respond more quickly to new requirements, adjust formulations directly during the production process and at the same time reduce energy and capital expenditure.

Trials on a ZE 65 BluePower line

The process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and validated using industrial roofing membrane formulations. The trials ran on a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and with multiple liquid feeders for free-flowing formulation components. The series has a Da/Di ratio of 1.65; the company says the combination of high torque and large free volume provides a wide process window for processing different formulations flexibly.

The tests confirmed what the company describes as excellent gelation levels of the PVC and high product quality, with the mechanical properties and weldability of the membranes meeting industrial requirements across several formulations. Bartel said the results demonstrate the potential of PVC InlineMixing for industrial roofing membrane production, and that customers can test their own formulations under production-relevant conditions at the Technology Center, optimize the process and lay the basis for industrial implementation.

Industrial use has already started. A reference plant achieves a total throughput of 1,800 kg/h using two extruders and two calenders, with PVC, additives and fillers as well as the resulting edge trimmings processed continuously and directly into finished membranes.